Warning marking sets DIN 30710

Warning markings in accordance with DIN 30710

Warning markings in accordance with DIN 30710 must be affixed to a number of special vehicles. They ensure that cars and service vehicles used for road maintenance or refuse collection, for example, remain visible and can be recognised immediately. We adapt the red and white reflective warning markings to the respective car model for you.

DIN 30710 Warning marking sets: Further information

Passenger car

Van

Truck

Municipal vehicles

DIN 30710 warning marking sets – frequently asked questions

Get in touch with us and we will equip individual special vehicles or your entire fleet with them. The high-quality DIN 30710 warning markings are extremely durable and have a long service life. We will explain our products in more detail here.

Who are the DIN 30710 warning markings for cars relevant for?

What does the DIN 30710 standard define? It regulates the use of vehicle warning markings in accordance with the Road Traffic Regulations (§ 35 para. 6, StVO). On the one hand, the safety marking has the task of immediate identification for other road users and excellent visibility. On the other hand, it legitimises certain special rights for specific vehicles, which are regulated in the above section of the StVO. This applies, for example, to the permission to stop at any point on the road or to drive in the opposite direction on a one-way street.

Auswahl an Sonderfahrzeugen:

Road construction
Motorway vehicles
Municipal vehicles for road maintenance
Street cleaning
Waste collection

Before a special vehicle is allowed on the road, it must be approved in accordance with the warning marking requirements of DIN 30710. We manufacture all goods quickly and send them to you directly. Local authorities and other government agencies are often our first point of contact when it comes to ordering warning markings in accordance with DIN 30710.

What are the requirements for warning markings according to DIN 30710?

We manufacture precisely fitted, tension-free elements for quick self-assembly in design112 quality for you. These consist of several parts with rounded corners and no contact surfaces. We manufacture for a wide range of vehicle types, which is why we are able to design customised products. Simply specify the vehicle type (make and model). We produce individual 3D surface elements that are attached in such a way that they follow the contours of the vehicle with millimetre precision. All components are absolutely secure. These warning markings in accordance with DIN 30710 can withstand many uses in wind and weather without any problems and retain their unique properties over a very long period of time.

Your advantages: Thanks to their precise fit, the delivered parts do not need to be cut or trimmed before installation or on the paintwork. Furthermore, installation on the special vehicle is no problem even for laymen. This work can be completed cleanly in a very short time.

Select and order products: Select vehicle-specific warning markings

The warning markings in Design30710 are red/white and microprismatic. The Oralite 5921M warning markings for fixed structures in accordance with RA 2 are manufactured by us specifically for the vehicle model you specify. Therefore, the number of individual items varies. Depending on the car, there may be around a dozen individual components that are attached to a precisely defined location on the vehicle surface.

Do you have any further questions about installation or our warning markings in accordance with DIN 30710? Then get in touch with us and we will be happy to advise you.

Ready-fitted, tension-free elements for easy self-installation in design112 quality with rounded corners and no sharp edges on the surfaces, for minimal attack surface and maximum service life. Our warning marking sets are tailored to the respective vehicle type and adapted to the contours and creases of the corresponding vehicle. The individual, tension-free 3D surface elements fit exactly onto the corresponding vehicle part.

This eliminates the need for tedious trimming or even cutting directly onto the paintwork. These warning marking sets can be installed by anyone in no time at all.

Precisely developed by us: pre-produced to measure for many vehicles
Rounded corners for minimal impact surface and maximum service life
Improved appearance – advanced workmanship – produced in Germany!
Over 30 years of experience – quality from design112
Quick and easy self-assembly
90% of sets in stock. Same-day dispatch!

How does self-assembly work in four steps?

We will show you how to easily assemble our warning markings in accordance with DIN 30710 for the first time.

Step 1: Prepare the surface of the vehicle

We recommend using design112 Surface Cleaner and the design112 microfibre cloth to prepare the surface. This special cleaner thoroughly cleans and degreases the surface, ensuring maximum adhesion of the individual film parts.

Step 2: Wetting the warning marking elements

The design112 professional adhesive fluid serves as a release agent for installing the warning marking and prevents the film from sticking directly to the vehicle surface. To do this, simply wet the adhesive layer of the film sufficiently with the fluid. This allows the film to be repositioned and moved easily during installation.

Step 3: Attaching the prefabricated warning marking elements

Apply the individual film parts to the vehicle according to the recommended application sequence in the installation instructions. Check the position of each part and reposition if necessary.

Step 4: Smoothing the film

To finally fix the respective film part in place, smooth the adhesive fluid from the centre to the edges using a squeegee with a felt edge. Any air bubbles should also be smoothed out with the squeegee from the centre to the edge.